HSS/HSH Strat 7-Way (Solderless)

We've partnered with the ultimate solder-less and convenient wiring guru, Obsidian Wire, to build the ultimate HSS & HSH Strat wiring harness to complement our Triple Shot HSS and HSH sets.

Harness Name: "HSS Strat 7-Way G2"

Premium HSS Strat Wiring Harness - Now for HSH Stratocaster too

This solderless HSS Strat wiring harness incorporates intelligent switching to give you the full clarity of your humbuckers AND your single coils at once giving you more useable tone and volume controls, greater clarity, and an onboard 'Mode' switch to allow you to switch between HSS & HSH modes. For ultimate versatility, we also offer you a 7-way switch upgrade option. 

INTELLIGENT SWITCHING

Optimized for humbuckers & single coils. When building an HSH or HSS Stratocaster, there is a toss-up between choosing 500k controls to retain the life of a humbucker, or 250k controls to balance brighter single coils.

We use Obsidian® Intelligent Switching to give you the absolute best of both your humbuckers and single coils with a wiring harness that will automatically switch between the two.

AUTO SPLIT

A balanced humbucker & single coil combo. Achieving the right balance between your humbuckers and single coils is an important part of hearing the full dynamics of both pickups together. With Obsidian auto split, your humbucker automatically splits into single-coil mode when matched with your other single coils on the selector switch.

CRYSTAL CLEAR TONE

Retain clarity at lower volumes. To make your tone crystal clear at lower volumes we include an Obsidian Custom spec treble bleed mod. This prevents tone 'muddiness' at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control.

7-WAY SWITCH // GILMOUR MOD - UPGRADE OPTION

The sweetest bell-like Strat tone. The Obsidian 7-Way Switch allows you to play your neck and bridge pickups together for the sweetest bell-like tones, or even all three pickups together. The switch is built into your tone control by use of a push/pull pot, so no extra mods are required.

CONTROL LAYOUT - INCLUDES 'MODE' SWITCH

HSS Mode: For Humbucker Bridge Pickup + Two Single Coils

1: Bridge humbucker in full mode (500k)
2: Bridge humbucker in split mode + middle (250k)
3: Middle (250k)
4: Middle + neck (250k)
5: Neck (250k) 

HSH Mode: For Humbucker Bridge & Neck Pickups + Middle Single Coil

1: Bridge humbucker in full mode (500k)
2: Bridge humbucker in split mode + middle (250k)
3: Middle (250k)
4: Neck humbucker in split mode + middle (250k)
5: Neck humbucker in full mode (500k) 

Tone Controls

Control 1: Master Volume (auto splits 250 for Single coils & 500k for Humbucker)
Control 2: Tone Control 1 (Neck & Middle) 250k No Load Pot & 0.022uf Capacitor
Control 3: Tone Control 2 (Bridge) 500k Pot & 0.022uf Capacitor

Ships with pickup set order unless purchased separately.